11
STEP 11: Secure Dishwasher to the Countertop
For countertops made of wood or that will not be
damaged by drilling, use Method 1. For countertops
made of granite, marble, or other materials that could be
damadged by drilling, use Method 2.
METHOD 1
1. Use longer brackets.
2. Insert the installation brackets into the slot.
3. Bend the brackets to secure them to the dishwasher
tub.
4. Using the provided screws,secure the dishwasher to
the countertop through the holes in the bracket.
METHOD 2
1. Open the door remove the tub cap on both sides of
the tub.
2. Driver a wood screw through the dishwasher side
holet and into the cabinet frame.
3. Reinstall the plastic caps.
STEP 12: Connect Water Supply
Connect water supply line to 90° elbow.
1. Slide compression nut, then ferrule over end of
water line.
2. Insert water line into 90° elbow.
3. Slide ferrule against elbow and secure with
compression nut.
Installation Instructions
Drive screws straight and flush. Protruding screw heads will
scratch the top of the control panel and can interfere with
door closing. If the gap is less than 10 mm between control
panel and the screws, suggest to chose method 2 .
Check to be sure that door spring does not rub or contact
the fill hose or water supply line. Test by opening and
closing the door. Re-route the lines if a rubbing noise or
interference occurs.
Important
Important
