Forza Elipse Series, Service Manual

Page: 49 / 51

49
II. Model Pin Configuration
To detection and control difference model of UPS, The controller need correct
model pin configuration for recognizing the UPS model.
The MODEL PORT
（
JP01
）
of the second version(710-01902-02) or the later
version CNTL board should be configured as follows
：
Note
：
“1” indicates that the jumper is connected;
“0”indicates that nothing is connected;
For the pin plugs that are not listed here are not connected.
pin11 & pin12 pin9 & pin10 pin7 & pin8 pin1 & pin2
T6K
0 0 0 1
T6KS
0 0 0 0
T10K
1 0 0 1
T10KS
1 0 0 0