Wireless operation is displayed in the status bar in the following:
Connection Status
Indication on the status bar
Wi-Fi disconnected
No icon
Wi-Fi turned on by the user, Wi-
Fi connection in the device is in
progress
Wi-Fi turned on, no connection
to the device
Wi-Fi turned on, the device is
connected
The device is recognised by a mobile device under the label “Forward
F_XXXX”, where XXXX are the four last digits of the serial number.
Once the password has been entered on the mobile device (for more
information on setting a password, see the Password Setupsubsection
in the
section) and the connection has been
established, the icon
in the status bar changes to
, the video
signal on the mobile device screen starts after the “viewfinder” button is
activated on the screen of the mobile device. The icon in the status bar
changes to
.
Note:you can configure the required access level to your device that is
granted to the Stream Vision application in theAccess Level Setup
subsection in the
menu section.
Summary of Contents for FN455S
