Possible cause
The Remote control is not activated.
Solution
Activate the remote control according to instructions (see the
Possible cause
The Remote Control is out of range of the device.
Solution
Return to the device coverage area.
Possible cause
Remote control battery low.
Solution
Install a new CR2032 battery as follows: unscrew the screws on the rear
cover of the Remote Control, remove the cover, install a new battery,
and screw the cover with screws.
Summary of Contents for FN455S
