77
Issued: 23.01.2008
Close the battery case, screw in all the
bolts and tighten.
Insert the battery and
connect
the battery
cables in reverse order:
1.
First
connect the cable to the battery
positive terminal
(red cable).
2.
Then
connect the cable to the battery
negative terminal
(black cable) .
Connecting the battery
cable
Removing the battery cable:
1. First
loosen the terminal on the
battery negative terminal (black cable)
with a ring spanner size 8 mm, and
remove the cable.
2. Then
loosen the terminal on the
battery positive terminal (red cable)
with a ring spanner size 8 mm, and
remove the cable.
Loosening the battery
cable
Remove all five bolts (1) on the bottom
of the battery case.
Put the battery case down on its bottom
side and open it.
Remove the battery case from the Strider
as described in chapter 13.3.3.
Repairs - batteries
Opening the battery
case
FOR U MN3/4
17.7.3 Replacing the batteries - 17 Ah
Fire and burns hazard if
battery terminal is short-
circuited!
• Never touch the positive and
negative battery terminals
simultaneously with metal parts
(short-circuiting).
Tools required:
1 x ring spanner, size 8 mm