42
Issued: 23.01.2008
(2.) Connect the battery charger mains
plug (4) to a mains socket and
switch on.
NOTE
:
The battery charger switches
on automatically when
connected to the mains.
(1.) Connect the battery charger plug (3)
to the battery case charging socket.
It is imperative that you observe the
sequence for connecting and
disconnecting the battery charger.
The jack socket (2) for connecting the
battery charger is located on the rear of the
battery case.
Connecting the
battery charger
Remove the battery case upwards out of
the FOR Uchassis.
This section applies to the FOR U fitted with
12 Ah batteries.
12 Ah batteries can be recognised because
the battery case (1) is a single unit.
Removing the battery
case
FOR U MN3/4
11.2.2 Charging the 12 Ah batteries in the battery case
(when removed from the FOR U)
Charging the batteries