23
Issued: 23.01.2008
CAUTION!
• Do not pull the armrests further
out than the marking (a) for
maximum armrest width.
Adjusting the armrest width
Loosen both clamping screws (2).
Pull both armrests (3) simultaneously to
the required width.
Secure the armrests by tightening the
clamping screws.
6.2.2
Adjusting the armrest
width
Accident hazard due to
non-engaged seat!
• Ensure that the seat is properly
engaged after adjustment by
pushing the seat slightly forwards
and then backwards.
Moving the
seat
Adjusting the seat position
Adjusting the distance between seat and
tiller
Pull the locking lever (1) upwards and
move the seat forwards or backwards to
the required distance.
Let go of locking lever and engage the
locking mechanism by pushing the seat
slightly forwards and backwards.
6.2
6.2.1
the seat
Adjusting
FOR U MN3/4