FPR-200
Page
Total
18
Pages
10
4.3
FPL-03
R&F
Video
Front Lens
Wires
Yellow
FPR-200 Main Device
→
vehicle mat
→
partition
board among engines and the interior of vehicle
→
front bumper
→
insert four-wire plug into socket of
lens
Right Len
Wires
Yellow
FPR-200 Main Device
→
vehicle mat
→
harness of
left guard
→
bottom of right rearview mirror
→
insert
four-wire plug into socket of lens
4.4
FPL-04
AV Output
Video
&Audio
Output
Wires
Red
FPR-200 Main Device
→
vehicle mat
→
AV IN
Socket of monitor
FPR-200 Main Device
→
vehicle mat
→
DC-IN
Socket of monitor
4.5
FPL-05
MISC
Input
Sound
Receiving &
IR Control
Wires
Blue
FPR-200 Main Device
→
vehicle mat
→
the whole
with protection cover below steering wheel
FPR-200 Main Device
→
vehicle mat
→
Control
Socket of monitor
4.6
FPL-06
CAR I/F
Control
Indication
Wires
Purple
FPR-200 Main Device
→
vehicle mat
→
ignition
lines behind of vehicle key slot
FPR-200 Main Device
→
vehicle mat
→
trunk or
partition board among engines and the interior of
vehicle
→
right turn lamp in rear or front of vehicle
FPR-200 Main Device
→
vehicle mat
→
trunk or
partition board among engines and the interior of
vehicle
→
left turn lamp in rear or front of vehicle
FPR-200 Main Device
→
vehicle mat
→
trunk
→
backward lamp
4.7
FPL-07
Power
Input
Power
Wires
Green
FPR-200 Main Device
→
vehicle mat
→
trunk
→
car
power supply
Remarks
:
Step 4 is limited only to be implemented by technicians from Modification Factory. End users are
suggested NOT to process this step.
Note
s:
Don’t make power line and ground line short circuit. Make sure that you have connected
to each wire before you turn on the power. Otherwise, any voltage even 12 volts would
damage to your body or electric equipment.