2.2.3 Script Configuration
This configuration item is mainly used in the R&D phase rather than the production
phase.For mass production operators,they do not need to care about this configuration.
R&D Phase:
The R&D staffs only need to care about Step4,and select the bin file developed with
Keil .Click the “OK”button to confirm.Other steps can be ignored.The special configuration
is shown as below:
Chart
2-2-3
Production Phase:
When the R&D staffs completed the tool,it can be compressed and sent to the plant
operators for mass production.
，
So for the mass production operators,they only need to
decompress the folder and open the tool.When the device is enumerated,just click the “Start
Download”button.Of course,the mass production operators can also open the Setting option
and check the Crc value in step4 to make sure that the write file is the one that the developer
want.
Rev_V1.8 15 / 20
www.fortiortech.com
