Fortinet FortiWiFi FortiWiFi-50B Install Manual Download

Page: 63 / 68

FortiWiFi Firmware

Testing new firmware before installing

FortiWiFi-50B FortiOS 3.0 MR6 Install Guide
01-30006-0445-20080131

Enter the firmware image file name and press Enter.

The TFTP server uploads the firmware image file to the FortiWiFi unit and the
following appears.

Save as Default firmware/Backup firmware/Run image without
saving: [D/B/R]

Type

The FortiWiFi image is installed to system memory and the FortiWiFi unit starts
running the new firmware image, but with its current configuration.

You can test the new firmware image as required. When done testing, you can
reboot the FortiWiFi unit, and the FortiWiFi unit will resume using the firmware
that was running before you installed the test firmware.

Summary of Contents for FortiWiFi FortiWiFi-50B





































































Search results

Summary of Contents for FortiWiFi FortiWiFi-50B

Reviews:

Related manuals for FortiWiFi FortiWiFi-50B

Brands by name

Popular brands

Fortinet FortiWiFi FortiWiFi-50B, Install Manual

Search results

Summary of Contents for FortiWiFi FortiWiFi-50B

Reviews:

Related manuals for FortiWiFi FortiWiFi-50B

Brands by name

Popular brands