background image

340

01-28006-0068-20041105

Fortinet Inc.

RBL & ORDBL list

Spam filter

RBL & ORDBL list

You can configure the FortiGate unit to filter email by accessing RBL or ORDBL 
servers. You can mark a match by each server as spam or reject. 

Figure 172:Sample RBL & ORDBL list

RBL & ORDBL options

RBL & ORDBL list has the following icons and features:

Configuring the RBL & ORDBL list

To add a server to the RBL & ORDBL list

1

Go to 

Spam Filter > RBL & ORDBL

.

2

Select Create New.

Figure 173:Adding an RBL or ORDBL server

3

Enter the domain name of the RBL or ORDBL server you want to add.

4

Select the action to take on email matched by the server.

5

Select Enable.

6

Select OK.

Create New

Select Create New to add a server to the RBL & ORDBL list.

Total

The number of items in the list.
The Page up, Page down, and Remove all entries icons.

RBL Server

The current list of servers. Select the check box to enable all the RBL and 

ORDBL servers in the list

Action

The action to take on email matched by the RBLs and ORDBLs. Actions 

are: Mark as Spam to apply the spam action configured in the protection 

profile, or Mark as Reject to drop the session.
The Delete and Edit/View icons.

Summary of Contents for FortiGate FortiGate-100A





































































































































































































































































































































































































Reviews: