Fortinet FortiGate FortiGate-100A Page 126 Administration Manual Download

Page: 126 / 388

126

01-28006-0068-20041105

Fortinet Inc.

Sending a bug report

System maintenance

Figure 46: Support

Sending a bug report

Use the Report Bug form to send bug information to Fortinet support.

Figure 47: Bug report

Report Bug

Select Report Bug to submit problems with the FortiGate unit to Fortinet

Support.

FDS Registration

Select FDS Registration to register the FortiGate unit with FortiNet.

Contact
Information

Enter the contact information so that FortiNet support can reply to your bug

report. Items marked with an * are required.

Bug Description*

Enter a description of the problem you have encountered with the FortiGate

unit.

Send diagnostic
information

Send diagnostic information about the FortiGate unit, including its current

configuration, to Fortinet for analysis.

Send email by
default mail-relay

Submit the bug report using the default mail relay.

Test

Test the default mail relay.

Summary of Contents for FortiGate FortiGate-100A





































































































































































































































































































































































































Search results

Summary of Contents for FortiGate FortiGate-100A

Reviews:

Related manuals for FortiGate FortiGate-100A

Brands by name

Popular brands

Fortinet FortiGate FortiGate-100A, Administration Manual

Search results

Summary of Contents for FortiGate FortiGate-100A

Reviews:

Related manuals for FortiGate FortiGate-100A

Brands by name

Popular brands