Home
/
Fortinet
/
FortiGate FortiGate-100A
/
Administration Manual

Fortinet FortiGate FortiGate-100A, Administration Manual, Page: 117 / 388

Share

Page: 117 / 388

Fortinet FortiGate FortiGate-100A Administration Manual Download Page 117

System maintenance

Backing up and Restoring

FortiGate-100A Administration Guide

01-28006-0068-20041105

117

5

Select OK to restore all configuration files to the FortiGate unit.
The FortiGate unit restarts, loading the new configuration files.

6

Reconnect to the web-based manager and review your configuration to confirm that
the uploaded configuration files have taken effect.

To back up individual categories

1

Go to

System > Maintenance > Backup & Restore

.

2

Select the Backup icon for the type of file you want to back up.

3

Save the file.

To restore individual categories

1

Go to

System > Maintenance > Backup & Restore

.

2

Select the Restore icon for the type of file you want to restore.

3

Enter the path and filename of the file, or select Browse and locate the file.

4

Select OK.
If you restore the system configuration, the FortiGate unit restarts, loading the new
system settings. You should then reconnect to the web-based manager and review
your configuration to confirm that the uploaded system settings have taken effect.

5

Select Return. (This step does not apply if you restore the system configuration.)

To back up VPN certificates

1

Go to

System > Maintenance > Backup & Restore

.

2

For VPN Certificates, All Certificates, select the Backup icon.

3

Enter a password and select OK.
Retain the password. You will need it to restore the certificates.

4

Save the file.

To restore VPN certificates

1

Go to

System > Maintenance > Backup & Restore

.

2

For VPN Certificates, All Certificates, select the Restore icon.

3

Enter the password used when creating the backup file.

4

Enter the path and filename of the backup file, or select Browse and locate the file.

5

Select OK.

«
...
115
116
117
118
119
...
»

Summary of Contents for FortiGate FortiGate-100A





































































































































































































































































































































































































Reviews:

No comments