Fortinet FortiGate FortiGate-100A, Administration Manual

Page: 164 / 388

164
01-28006-0068-20041105 Fortinet Inc.
get router info rip Router
get router info rip
Use this command to display information about RIP.
Command syntax
get router info rip {database | interface}
Examples
get router info rip database
get router info rip interface
config router ospf
Use this command to configure open shortest path first (OSPF) on the FortiGate unit.
OSPF is an open protocol based on the shortest path first algorithm. OSPF is a link
state protocol capable of routing larger networks than the simpler distance vector RIP
protocol. An OSPF autonomous system (AS) or routing domain is a group of areas
connected to a backbone area. A router connected to more than one area is an area
border router (ABR). Routing information is contained in a link state database. Routing
information is communicated between routers using link state advertisements (LSAs).
More information on OSPF can be found in RFC 2328.
Command syntax pattern
config router ospf
set <keyword> <variable>
end
config router ospf
unset <keyword>
end
get router ospf
show router ospf
The
config router ospf
command has 7 subcommands.
config area
config distribute-list
config neighbor
config network
config ospf-interface
config redistribute
router info rip command keywords and variables
Keywords and variables Description Availability
database
Show the entries in the RIP routing database. All models.
interface
Show the status of the FortiGate interfaces and
whether RIP is enabled for each interface.
All models.