manualshive.com logo in svg

Fortinet FortiGate 60R, Installation And Configuration Manual

Share
Download
Fortinet FortiGate 60R Installation And Configuration Manual Download Page 29

Getting started 

Powering on

FortiGate-60R Installation and Configuration Guide

 29

Power requirements

• DC input voltage: 12 V
• DC input current: 3 A

Environmental specifications

• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing

Powering on

To power on the FortiGate-60 unit:

1

Connect the AC adapter to the power connection at the back of the FortiGate-60 unit.

2

Connect the AC adapter to the power cable.

3

Connect the power cable to a power outlet.
The FortiGate-60 unit starts up. The Power and Status lights light.

Table 1: FortiGate-60 LED indicators

LED

State

Description

Power

Green

The FortiGate unit is powered on.

Off

The FortiGate unit is powered off.

Status

Red

The FortiGate unit is starting up.

Off

The FortiGate unit is running normally.

Off

The FortiGate unit is powered off.

Link

(Internal 
DMZ
WAN1
WAN2)

Green 

The correct cable is in use and the connected 
equipment has power.

Flashing Green

Network activity at this interface.

Off

No link established.

100

(Internal 
DMZ
WAN1
WAN2)

Green

The interface is connected at 100 Mbps.

Summary of Contents for FortiGate 60R















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands