manualshive.com logo in svg

Fortinet FortiGate 60R, Installation And Configuration Manual

Share
Download
Fortinet FortiGate 60R Installation And Configuration Manual Download Page 22

22

Fortinet Inc.

About this document

Introduction

About this document

This installation and configuration guide describes how to install and configure the 
FortiGate-60. This document contains the following information:

•

Getting started

 describes unpacking, mounting, and powering on the FortiGate.

•

NAT/Route mode installation

 describes how to install the FortiGate if you are 

planning on running it in NAT/Route mode.

•

Transparent mode installation

 describes how to install the FortiGate if you are 

planning on running it in Transparent mode.

•

System status

 describes how to view the current status of your FortiGate unit and 

related status procedures including installing updated FortiGate firmware, backing 
up and restoring system settings, and switching between Transparent and 
NAT/Route mode.

•

Virus and attack definitions updates and registration

 describes configuring 

automatic virus and attack definition updates. This chapter also contains 
procedures for connecting to the FortiGate tech support webs site and for 
registering your FortiGate unit.

•

Network configuration

 describes configuring interfaces, configuring routing, and 

configuring the FortiGate as a DHCP server for your internal network.

•

RIP configuration

 describes the FortiGate RIP2 implementation and how to 

configure RIP settings.

•

System configuration

 describes system administration tasks available from the 

System > Config web-based manager pages. This chapter describes setting 
system time, adding and changed administrative users, configuring SNMP, and 
editing replacement messages.

•

Firewall configuration

 describes how to configure firewall policies to control traffic 

through the FortiGate unit and apply content protection profiles to content traffic.

•

Users and authentication

 describes how to add user names to the FortiGate user 

database and how to configure the FortiGate to connect to a RADIUS server to 
authenticate users.

•

IPSec VPN

 describes how to configure FortiGate IPSec VPN.

•

PPTP and L2TP VPN

 describes how to configure PPTP and L2TP VPNs between 

the FortiGate and a windows client.

•

Network Intrusion Detection System (NIDS)

 describes how to configure the 

FortiGate NIDS to detect and prevent network attacks.

•

Antivirus protection

 describes how use the FortiGate to protect your network from 

viruses and worms.

•

Web filtering

 describes how to configure web content filtering to prevent unwanted 

Web content from passing through the FortiGate.

•

Email filter

 describes how to configure email filtering to screen unwanted email 

content.

•

Logging and reporting

 describes how to configure logging and alert email to track 

activity through the FortiGate.

• The 

Glossary

 defines many of the terms used in this document.

Summary of Contents for FortiGate 60R















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands