background image

254

Fortinet Inc.

Configuring alert email

Logging and reporting

Searching logs

Use the following procedure to search log messages saved in system memory:

1

Go to 

Log&Report > Logging

.

2

Select Event Log, Attack Log, Antivirus Log, Web Filter Log, or Email Filter Log.

3

Select 

 to search the messages in the selected log.

4

Select AND to search for messages that match all the specified search criteria.

5

Select OR to search for messages that match one or more of the specified search 
criteria.

6

Select one or more of the following search criteria:

7

Select OK to run the search.
The web-based manager displays the messages that match the search criteria. You 
can scroll through the messages or run another search.

Configuring alert email

You can configure the FortiGate unit to send alert email to up to three email addresses 
when there are virus incidents, block incidents, network intrusions, and other firewall 
or VPN events or violations. After you set up the email addresses, you can test the 
settings by sending test email.

Adding alert email addresses

Testing alert email

Enabling alert email

Adding alert email addresses

Because the FortiGate unit uses the SMTP server name to connect to the mail server, 
it must be able to look up this name on your DNS server. Therefore, before configuring 
alert email ensure that you have configured at least one DNS server.

To add a DNS server

1

Go to 

System > Network > DNS

.

2

If they have not already been added, add the primary and secondary DNS server 
addresses provided to you by your ISP.

3

Select Apply.

To add alert email addresses

1

Go to 

Log&Report > Alert Mail > Configuration

.

2

Select Authentication if your email server requires an SMTP password.

Keyword

To search for any text in a log message. Keyword searching is 

case-sensitive.

Time

To search log messages created during the selected year, month, day, and 

hour.

Note: 

After running a search, to display all log messages again, run another search but leave all 

the search fields blank.

Summary of Contents for FortiGate 60R















































































































































































































































































Reviews: