manualshive.com logo in svg

Fortinet FortiGate 400, Installation & Configuration Manual, Page: 289 / 308

Share
Download
Fortinet FortiGate 400 Installation & Configuration Manual Download Page 289

Logging and reporting 

Viewing logs saved to memory

FortiGate-400 Installation and Configuration Guide

 289

Viewing logs saved to memory

If the FortiGate is configured to save log messages in system memory, you can use 
the web-based manager to view, search, and clear the log messages. This section 
describes:

•

Viewing logs

•

Searching logs

Viewing logs

Log messages are listed with the most recent message at the top. Use the following 
procedure to view log messages saved in system memory:

1

Go to 

Log&Report > Logging

.

2

Select Event Log, Attack Log, Antivirus Log, Web Filter Log, or Email Filter Log.
The web-based manager lists the log messages saved in system memory.

3

Scroll through the log messages to view them.

4

To view a specific line in the log, type a line number in the Go to line field and select 

.

5

To navigate through the log message pages, select Go to next page 

 or Go to 

previous page 

.

Searching logs

Use the following procedure to search log messages saved in system memory:

1

Go to 

Log&Report > Logging

.

2

Select Event Log, Attack Log, Antivirus Log, Web Filter Log, or Email Filter Log.

3

Select 

 to search the messages in the selected log.

4

Select AND to search for messages that match all the specified search criteria.

5

Select OR to search for messages that match one or more of the specified search 
criteria.

6

Select one or more of the following search criteria:

7

Select OK to run the search.
The web-based manager displays the messages that match the search criteria. You 
can scroll through the messages or run another search.

Keyword

To search for any text in a log message. Keyword searching is 

case-sensitive.

Time

To search log messages created during the selected year, month, day, and 

hour.

Note: 

After running a search, to display all log messages again, run another search but leave all 

the search fields blank.

Summary of Contents for FortiGate 400





















































































































































































































































































































Reviews:

No comments