manualshive.com logo in svg

Fortinet FortiGate 400, Installation & Configuration Manual, Page: 128 / 308

Share
Download
Fortinet FortiGate 400 Installation & Configuration Manual Download Page 128

128

Fortinet Inc.

Updating registration information

Virus and attack definitions updates and registration

Updating registration information

You can use your Fortinet support user name and password to log on to the Fortinet 
Support web site at any time to view or update your Fortinet support information.

This section describes:

•

Recovering a lost Fortinet support password

•

Viewing the list of registered FortiGate units

•

Registering a new FortiGate unit

•

Adding or changing a FortiCare Support Contract number

•

Changing your Fortinet support password

•

Changing your contact information or security question

•

Downloading virus and attack definitions updates

Recovering a lost Fortinet support password

If you provided a security question and answer when you registered on the Fortinet 
support web site, you can use the following procedure to receive a replacement 
password. If you did not provide a security question and answer, contact Fortinet tech 
support.

1

Go to 

System > Update > Support

.

2

Select Support Login.

3

Enter your Fortinet support user name.

4

Select Forgot your password?

5

Enter your email address and select Submit.

The security question that you entered when you registered is displayed.

6

Enter the answer to your security question and select Get Password.

If you entered the correct answer to the security question, an email containing a new 
password is sent to your email address. You can use your current user name and this 
password to log into the Fortinet support web site.

7

Select Support Login.

8

When your new password arrives, enter your user name and new password to log into 
the Fortinet support web site.

Viewing the list of registered FortiGate units

1

Go to 

System > Update > Support

 and select Support Login.

2

Enter your Fortinet support user name and password.

3

Select Login.

4

Select View Products.

The list of FortiGate products that you have registered is displayed. For each 
FortiGate unit, the list includes the serial number and current support options for that 
unit.

Summary of Contents for FortiGate 400





















































































































































































































































































































Reviews:

No comments