Fortinet FortiGate 400 Installation & Configuration Manual Download Page 274

Page: 274 / 308

274

Fortinet Inc.

Script filtering

Web filtering

Select the Cerberian URL Filtering option.

Go to

Firewall > Content

Profile.

Create a new or select an existing content profile and enable Web URL Block.

Go to

Firewall > Policy

Create a new or select an existing policy that will use the content profile.

Select Anti-Virus & Web filter.

Select the content profile from the Content Profile list.

Click OK.

Script filtering

You can configure the FortiGate unit to remove Java applets, cookies, and ActiveX
scripts from the HTML web pages.

•

Enabling the script filter

•

Selecting script filter options

Enabling the script filter

Go to

Firewall > Content Profile

Select the content profile for which you want to enable script filtering.

Select Script Filter.

Select OK.

Selecting script filter options

Go to

Web Filter > Script Filter

Select the script filter options that you want to enable.
You can block Java applets, cookies, and ActiveX.

Select Apply.

Note:

Blocking of any of these items might prevent some web pages from working properly.

Summary of Contents for FortiGate 400





















































































































































































































































































































Search results

Summary of Contents for FortiGate 400

Reviews:

Fortinet FortiGate 400, Installation & Configuration Manual, Page: 274 / 308

Search results

Summary of Contents for FortiGate 400

Reviews: