manualshive.com logo in svg

Fortinet FortiGate 400, Installation & Configuration Manual, Page: 129 / 308

Share
Download
Fortinet FortiGate 400 Installation & Configuration Manual Download Page 129

Virus and attack definitions updates and registration 

Updating registration information

FortiGate-400 Installation and Configuration Guide

 129

Figure 7: Sample list of registered FortiGate units

Registering a new FortiGate unit

1

Go to 

System > Update > Support

 and select Support Login.

2

Enter your Fortinet support user name and password.

3

Select Login.

4

Select Add Registration.

5

Select the model number of the Product Model to register.

6

Enter the Serial Number of the FortiGate unit.

7

If you have purchased a FortiCare Support Contract for this FortiGate unit, enter the 
support contract number.

8

Select Finish.

The list of FortiGate products that you have registered is displayed. The list now 
includes the new FortiGate unit.

Adding or changing a FortiCare Support Contract number

1

Go to 

System > Update > Support

 and select Support Login.

2

Enter your Fortinet support user name and password.

3

Select Login.

4

Select Add/Change Contract number.

5

Select the Serial Number of the FortiGate unit for which to add or change a FortiCare 
Support Contract number.

6

Add the new Support Contract number.

Summary of Contents for FortiGate 400





















































































































































































































































































































Reviews:

No comments