Using Web Manager for Configuration
Page 35
FortiFone™ User Guide for FON-260i
Call Preferences
Most of the call preference parameters can be altered according to the user’s requirements.
•
Anonymous Call Block:
When enabled, the phone blocks incoming calls with an anonymous
Caller ID.
•
Call Waiting Function:
When enabled, the phone will accept additional calls and notify the
user visually of the incoming call while in a conversation. If disabled, no additional calls are
accepted and the system will follow the busy response configuration.
•
Call Waiting Tone:
When enabled, a tone is played to the user along with Caller ID
information to announce the new call.
•
Call Hold Ringback:
When enabled, the phone rings if the user has taken a 2nd call then
terminated the call with another caller still on hold.
•
Message Waiting Tone:
When enabled, a stutter dial tone is played when first going off-hook
and a new message is waiting. The visual LED notification is always enabled for voicemail
notification.
•
Auto Answer:
When enabled, it will automatically activate the speakerphone when an
incoming call is received.
•
Access Code Prefix:
To simplify dialing from the Phonebook or Call Logs, enter a hunt group
(9, 81-88) that you would like the phone to use as a prefix to place calls using the specified
hunt group. If direct line access is enabled for the extension, then leave blank.
Summary of Contents for FortiFone
Page 1: ...FortiFone User Guide for FON 260i...
Page 72: ......
