manualshive.com logo in svg

Fortinet FortiFone FON-C70, User Manual

Share
Download
Fortinet FortiFone FON-C70 User Manual Download Page 30

Configuration Overview

Page 24

FortiFone User Guide

Auto Provision

The FON-C70 can be set to obtain configuration files through auto provisioning via 
FTP/TFTP/HTTP/HTTPS.

To configure auto provisioning via the phone user interface:

1.

Press 

Menu

 > 

Settings

 > 

Advanced Settings

 (Default password: 23646) > 

Auto Provision

.

2.

Enter the URL of the auto provisioning server. Press 

 to select 

Enabled

 from the 

Lock 

Enable

 field.

3.

Press 

 to enter the 

User Name

.

4.

Press 

 to enter the 

Password

.

5.

Press the 

Save

 softkey.

Reboot the phone to start the auto provisioning process.

FWD International

This setting allows an international number to be set under 

Menu

 > 

Features 

> 

Call Forwarding.

 

Press the 

 or 

 softkey to select 

Enabled

 or 

Disabled

.

Messages

The 

Messages

 section is where you can check Voice Mail and Text Messages.

Voice mail

When receiving a new voice mail, the LCD screen will prompt 

n New Voice Mail(s)

 (

n

 indicates 

the number of unread voice messages, e.g., 89 New Voice Mail(s)) and display 

.

To listen to voice mail:

1.

When the LCD screen prompts that the phone receives a new voice mail, you can press the 

Connect

 softkey to dial out the voice mail access code.

2.

Follow the voice prompt to listen to your voice mail.

To view the voice mail via phone user interface:

1.

Press 

Menu 

> 

Message

 > 

Voice Mail 

> 

View Voice Mail

. The LCD screen displays the 

amount of new and old voice mails.

2.

Press the 

Connect

 softkey to listen to voice mail.

When using the FON-C70 outside of the FortiVoice, the Voice Mail access code can be 
programmed by following these steps:

1.

Press 

Menu 

> 

Message

 > 

Voice Mail 

> 

Set Voice Mail

.

2.

Press the 

123

 softkey to select the proper input mode and then enter the voice mail access 

code (e.g., 

*88

).

3.

Press the 

Save

 softkey to accept the change or the 

Back

 softkey to cancel.

Summary of Contents for FortiFone FON-C70










































Reviews:

No comments

Brands by name

Popular brands

Load more brands