background image

Configuration Overview

Page 22

FortiFone User Guide

Phone Lock

You can lock your phone temporarily when you are not using it. This feature helps to protect 
your phone from unauthorized use.

Phone lock consists of the following:

Menu Key

: The 

Menu

 softkey is locked. You cannot access the menu of the phone until 

unlocked.

Function Keys

: The function keys are locked. You cannot use the  , 

 or 

 key or 

softkeys until unlocked.

All Keys

: All keys are locked, except 

_

?

 and digit keys. You are 

only allowed to dial emergency numbers, reject by pressing the 

Reject

 softkey or 

answer incoming calls by pressing the 

Answer

 softkey or 

, and end a call by pressing the 

EndCall

 softkey or 

.

To activate the phone lock via phone user interface:

1.

Press 

Menu 

Settings

 > 

Advanced Settings

 (Default password: 23646) > 

Phone Lock

.

2.

Press the 

 or 

 softkey to select 

Enabled

 from the 

Lock Enable

 field.

3.

Press the 

 or 

 softkey to select the desired type from the 

Lock Type

 field.

4.

(Optional) Enter the desired interval of automatic phone lock in the 

Lock Time Out 

field. The 

default timeout is 

0

. It means the phone will not be automatically locked. You need to long 

press the 

?

 key to lock it immediately when the phone is idle. If it is set to other values 

except 

0

 (e.g. 

5

), the phone will be locked when the phone is inactive in idle screen for the 

designated time (in seconds).

5.

Press the 

Save

 softkey to accept the change.

When the phone is locked, the LCD screen prompts 

Phone locked

 and displays the 

 icon.

To unlock the phone, you must know the phone unlock PIN. The default phone unlock PIN is 

123

.

To change the phone unlock PIN via phone user interface:

1.

Press 

Menu 

Settings

 > 

Basic Settings

 > 

Change PIN

.

2.

Enter the desired value in the 

Current PIN

New PIN

 and 

Confirm PIN

 fields respectively.

3.

Press the 

Save

 softkey to accept the setting or the 

Back

 softkey to cancel.

To unlock the phone via phone user interface:

1.

Press any locked key, the LCD screen prompts 

Please Enter PIN

.

2.

Enter the PIN in the 

Unlock PIN

 field.

3.

Press the 

OK

 softkey to unlock the keypad. The 

 icon disappears from the LCD screen.

The unlock PIN length must be within 15 digits.

Summary of Contents for FortiFone FON-C70










































Reviews: