manualshive.com logo in svg

Fortinet FortiBridge 1000, Installation Manual

Share
Download
Fortinet FortiBridge 1000 Installation Manual Download Page 42

42

01-28004-0025-20040830

Fortinet Inc.

Using the setup wizard

Transparent mode installation

Using the setup wizard

From the web-based manager, you can use the setup wizard to begin the initial 
configuration of the FortiGate unit. For information about connecting to the web-based 
manager, see 

“Connecting to the web-based manager” on page 14

.

The first time you connect to the FortiGate unit, it is configured to run in NAT/Route 
mode.

To switch to Transparent mode using the web-based manager

1

Go to 

System > Status

.

2

Select Change beside the Operation Mode.

3

Select Transparent in the Operation Mode list.

4

Select OK.

To reconnect to the web-based manager, change the IP address of the management 
computer to 10.10.10.2. Connect to the internal interface or port 1, 2, or 3 and browse 
to https:// followed by the Transparent mode management IP address. The default 
FortiGate Transparent mode management IP address is 10.10.10.1.

To start the setup wizard

1

Select Easy Setup Wizard (the middle button in the upper-right corner of the 
web-based manager).

2

Use the information that you gathered in 

Table 8 on page 38

 to fill in the wizard fields. 

Select the Next button to step through the wizard pages.

3

Confirm your configuration settings, and then select Finish and Close.

Reconnecting to the web-based manager

If you changed the IP address of the management interface while you were using the 
setup wizard, you must reconnect to the web-based manager using the new IP 
address. Browse to https:// followed by the new IP address of the management 
interface. Otherwise, you can reconnect to the web-based manager by browsing to 
https://10.10.10.1. If you connect to the management interface through a router, make 
sure that you have added a default gateway for that router to the management IP 
default gateway field.

Connecting the FortiGate unit to your network

After you complete the initial configuration of the FortiGate-1000 unit, you can connect 
the FortiGate-1000 unit between your internal network and the Internet and to other 
networks.

There are two gigabit connectors on the FortiGate-1000:

• Internal for connecting to your internal network,
• External for connecting to an external firewall or router.

Summary of Contents for FortiBridge 1000

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands