background image

STEP 2

Engage the parking brake.

STEP 3

Release the brake pedal.

STEP 4

Remove the key from the ignition barrel. The engine will shut down and 
the vehicle will be ready to start at any time.

STEP 5

Exit the vehicle and close all of the doors.
The Remote-Starter will stop running once all the doors are closed.

The vehicle is ready to start. Open any door to cancel Ready Mode and re-begin the sequence from step 1

.

TO DEACTIVATE READY MODE:

 

Open any door(s)            •     Open the hood          •     Disengage of the parking brake

 

 Note : If the parking lights flash 3 times when Remote-Starting, Ready Mode is not enabled.

 DRIVING  OFF

When the vehicle is running with the Remote-Starter, enter the vehicle and proceed with the following steps:

STEP 1

In

sert the key and turn it to the ignition (ON/Run) position.

WARNING: 

Do not turn the key to the 

START

 position when the engine is 

running. This may damage the ignition system on some vehicles.

STEP 2

Step on the brake pedal to disable the Remote-Starter, and put the 
vehicle in gear.

 

 CANCELLING A REMOTE START

 See USING THE REMOTE CONTROL, page 3

    REMOTE-STARTER FEATURES

 IDLE MODE (AUTOMATIC TRANSMISSION)

 Idle Mode allows the vehicle to run without the key in the ignition barrel. For example, if you stop for a quick errand 
or delivery, simply allow the vehicle to run while you are gone. The engine will run until the Remote-Starter runtime 
expires. Press START any time the vehicle is running with the Remote-Starter to reset this timer. To activate Idle 
Mode (automatic transmission) proceed with the following steps:

STEP 1

   

 With the key in the barrel at the ignition (ON/RUN) position and the en-
gine running, press the START  button   until the parking lights turn on. The 
remote Green Led flash and a ascending melodie will sound to confirm.

STEP 2

 Turn the key to the OFF position and remove the key from the ignition bar-
rel. The vehicle will continue to run with the the Remote-Starter.

STEP 3

   

 Get out of the vehicle and press the LOCK  button  to lock the doors. The en-
gine will run until the Remote–Starter runtime expires. The remote Green 
Led flash and bip once to confirm. 

 

WARNING : Never leave children or animals in a Remote-Started vehicle  unattended.

 I DLE MODE (MANUAL TRANSMISSION)

Page 6 / 13

Summary of Contents for FTX-64-2W














Reviews: