Fortin FTX-64-2W User Manual Download Page 11

- Runtime Reset 

- Secure Transmitter Mode

  REMOTE  DOOR  LOCKS 

 If the Remote-Starter is installed with door locks, you will be able to lock and unlock the vehicle without using the key 
or OEM key fob. 

To UNLOCK the doors and DISARM the Alarm:

  

 

 

Press the UNLOCK  

button fo 

 

 

0.5 second.  The remote Green 
Led flash and bip once to con-
firm.

The parking lights will flash twice and the LED will turn OFF to con-
firm the signal. The Starter-Kill will also deactivate allowing the 
vehicle to be started with the key.  If UNLOCK is pressed again 
(consecutively) the horn will honk twice (if installed) to confirm. 

Note: The system can be configured during installation so 
the horn confirms UNLOCK on the first attempt. 

 

To LOCK the doors and ARM the Alarm:

  

  

Press the LOCK  button for  0.5 
second.  The remote Green Led 
flash and bip once to confirm.

The parking light will flash once and the LED will turn ON to con-
firm the signal.  The Starter-Kill will activate preventing the ve-
hicle from being started with the key.  If LOCK is pressed again 
(consecutively) the horn will honk once (if installed) to confirm.

Note: The system can be configured during installation so 
the horn confirms LOCK on the first attempt.

  

ACTIVE OR PASSIVE ARMING

 Passive Mode will allow the Alarm to automatically rearm itself 60 seconds after it is disarmed if no door(s) (or trunk) 
are open(ed). Opening a door before the 60 seconds has expired will reset the timer but will also prevent the Alarm 
from locking the doors. This option is enabled by default and the Alarm will never arm as long as at least one door 
is left open. When this feature is disabled the Alarm is considered to be in Active Mode which requires the remote 
transmitter to arm the Alarm.

 Note: The automatic rearm can be deactivated by pressing the UNLOCK button.

 IGNITION DOOR LOCKS

 Ignition Door Locks is an automatic passenger safety feature. When enabled the Remote-Starter/Alarm will auto-
matically LOCK the vehicles doors once the key is turned to the ignition (ON/RUN) position and the brake pedal is 
pressed. The Remote-Starter/Alarm will also automatically UNLOCK the vehicles doors once the key is turned to 
the OFF position.

 SECURITY  LOCK

 Security Lock triggers the vehicle’s door locks after the Remote-Starter has shut down. In some cases before the 
Remote-Starter is able to start the vehicle it must disarm the Original Equipment Manufacture (OEM) anti-theft 
system first (if equipped) to prevent a false alarm when the vehicle is running. After the Remote-Starter runtime 
has expired and the Remote-Starter shuts down, the Security Lock will re-arm the OEM anti-theft system in order to 
return the vehicle to its original protective state.

  TRUNK/HATCH RELEASE  (ZONE 6)

 The vehicle’s trunk or rear hatch (if installed) can be opened by pressing the TRUNK 

 

 

button for 3 seconds.   The 

Alarm will not disarm but it will ignore the trunk zone until it is closed.

 RUNTIME

 On gas engines the Remote-Starter can run the vehicle for either 3, 7 or 15 (default) minutes. On diesel engines the 
Remote-Starter can run the vehicle for either 6, 15 or 30 (default) minutes. 

 RUNTIME RESET  

 Once the vehicle is running with the Remote-Starter the runtime can be reset (before it expires) at any time by press-
ing the START button while the vehicle is Remote-Started. The horn/siren will sound once to confirm (If installed).

   ALARM

 AUDIBLE  CONFIRMATION

 By default the Alarm will not send an audible confirmation (horn/siren) after the first signal has been received from 
the remote transmitter(s).

Page 11 / 13

Summary of Contents for FTX-64-2W














Reviews: