FORTEZA TRIBO-M, Operation Manual

Page: 4 / 33

JSC “Forteza” “Forteza Tribo ‐ M” operation manual
4
1. General information
The operation manual contains information about the construction, technical features, operation
and application of the “Forteza Tribo ‐ M” security detector system. The manual also contains
information, necessary for the proper installation and use of the device.
1.1. Purpose
“Forteza Tribo ‐ M” is single ‐ position triboelectric, passive and unmasked guard alarm system with
surface detection zone, which is designed for extended perimeter areas and is used as a stationary
unit.
The guard alarm system for perimeter fences is meant to generate alarm signals on the local
deformation of the fence and the sensor fastened to it in unauthorized penetration by getting over
the fence, no facilities being used, and as a result of damage to the fence, the sensor, and its
fasteners.
The guard alarm system ensures the monitoring of the sensor integrity (the cable of triboelectric
effect), the connecting cable being checked as well. On their damage (short ‐ circuit or broken cable)
the guard alarm system generates an alarm signal on the fault.
1.2. Operating conditions
The guard alarm system is intended for continuous round ‐ the ‐ clock operation. Its
performance is maintained within the set normal values. The guard alarm does not generate the false
“Alarm” signals on and after exposure to the outdoor environmental factors (OEF) given in Table 1.1.
Table 1.1
OEF Description Value
Acoustic noise
Is not regulated
Elevated ambient temperature Elevated operating temperature
+ 50
o
C
Low ambient temperature Low operating temperature
‐ 40
o
C
Elevated humidity
Up to 98% at a temperature of +35
o
C
Is not regulated with a signal ‐ processing unit (SPU)installed in the metal
alarm cabinet
Low humidity Is not regulated
Rain Is not regulated
Hoar ‐ frost and ice ‐ crusted
ground
Thickness (at wind speed)
2 mm
(10 m/s)
Dew Is not regulated
Blanket of snow Is not regulated
Fog Of any intensity