FORTEZA TRIBO-M, Operation Manual

Page: 16 / 33

JSC “Forteza” “Forteza Tribo ‐ M” operation manual
16
7. Maintenance
7.1. In maintenance be sure to observe the safety precautions specified in
Section 4.
7.2. Types of maintenance services:
•
Monthly maintenance No.1;
•
Seasonal maintenance is performed in the guard alarm preparation for use at autumn ‐ winter
and spring ‐ summer periods;
•
Annual maintenance No.2.
7.3. For the scope of maintenance services, refer to Table 7.1.
Table 7.1
Type of
maintenance
Operations performed Procedure Norms
1. Maintance No 1
(mothly)
1.1. SPU visual inspection and
cleaning without opening
it
Clean the SPU surface of
dust, dirt and moisture.
Make sure the case is
free of mechanical
damages. Check the seal
for availability
The SPU surface should
be free of dust, moisture
and pronounced
mechanical damages.
The seal should be intact
1.2.
SPU check for reliable
grounding
Inspect the points of
ground connection
visually. Tighten the
screws up
Screw joints should be
tightened safely
1.3.
Visual inspection of the
sensor, adapter, coupling,
and terminal unit
The sensor, adapter,
coupling, and terminal
unit should be free of
damages. The fastening
to the fence should be
intact
1.4. Guard alarm check for
serviceability with the remote
monitoring function
Apply a 0.1 to 0.5 ‐ s
supply voltage pulse to
the « ДК » input of the
signal ‐ processing unit.
With the test ‐ receiving
equipment at the using
activity not permitting
the use of the remote
monitoring function,
subject the fence
components at its
different portions to the
check action with a force
of 8 kg, minimum, for
flexible fences and 20 kg,
minimum, for rigid ones
In so doing the guard
alarm should go into the
“Alarm” mode and then
again into the “Guard”
one.
The guard alarm should
go into the “Alarm” mode
and then again into the
“Guard” one upon every
check action