Fortador Pro Plus, Operating Manual

Page: 31 / 44

31
One of conditions of proper protection against electric shock is that the machine’s electrical installations must be periodically
inspected by entities authorised thereto to. Pay special attention while you repair or adjust your machine, as most of its
elements are very hot, and you can get serious burns if you touch them directly. Since this is a pressure machine, be careful
when you operate or adjust it. In the event its pressure system is unsealed when in operation, you can undergo severe burns
from high-temperature steam. Persons who perform maintenance / adjustments at this machine should hold relative permits
and logbooks that allow them to carry out maintenance/ adjustments on thermal pressure equipment (Group G2 energy
licence) and electrical equipment (Group G1 energy licence).
Residual-current circuit-breaker with overcurrent protection protects the user against touch voltage and leakance. It is
absolutely necessary to test it as described in “Before each start-up” chapter by pressing the Test button in normal operation
mode. When the Test button is pressed, this safety device should be activated to disconnect power. In various machines’
residual-current circuit-breakers, the Test button is located as below.