20
13
14 17
19
12
15
16
18
11
SWITCH-OFF PROCEDURE
Switch off the machine using the button on the touch
screen, and then disconnect it from its power supply. NOTE:
Failure to observe this sequence may result in damage to
the machine’s controller.
Disconnect the hoses, clean them and roll them up,
being careful not to exceed the allowable bending radius
(min. 10 cm);
NOTE: Bending the hose to any radius that is
tighter than allowed will result in its damage!
If the machine was connected to an external water supply
source, disconnect the supply hose from valve no. 18.
3
4
1
In order to prolong your FORTADOR machine lifetime, take due care of your machine and obey the Switch-Off Procedure
as presented herein.
Install the boiler draining outlet w quick connector no. 19.
5
2
Close the steam supply valves to the hoses (no. 13 and
14), press the gun’s trigger to release any steam that still
remains inside hoses.
Summary of Contents for Pro Plus
Page 1: ......
Page 4: ......
Page 23: ...23 A 1 5 7 9 2 3 4 6 8 FAQ Fig 1 Fig 2 ...
Page 44: ...www fortador com ...
