P a g e
|
16
Push the RED SAFETY BAR. This will stop the feed rollers instantly. The chipper
flywheel will still be turning. Turn the throttle lever to idle and switch off the engine
with the ignition key.
Before
using the
chipper
every day
• Start the machine with the ignition key on the control panel.
• With the engine running at full speed tap the green button (3) once and the
rollers will go into reverse,
• Tap the green button again and rollers will go into forward (chipping mode).
• To stop the feed rollers either tap the red stop button (2) or push the red stop
bar (1) and the rollers will stop instantly.
• If any of these functions fail, turn off the machine and remove the key from the
ignition switch and contact Redwood Global and ask for service.
1
Red Stop Bar
2
Red Stop Button
3
Green Forward and Reverse Button
4
E-Stop (if fitted)
Summary of Contents for TR6
Page 5: ...P a g e 4 ...
