2
BEFORE YOU BEGIN
READ CAREFULLY AND SAVE THESE INSTRUCTIONS
!
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
• Use this unit only in the manner intended by the manufacturer. If you have question, contact the
manufacturer.
• Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means
to prevent power from being switched on accidentally. When the service disconnecting means cannot be
locked, securely fasten a prominent warning device, such as a tag, to the service panel.
• To Reduce The Risk Of Personal Injury, Do Not Bend The Blade Brackets When Installing The Brackets,
Balancing The Blades, Or Cleaning The Fan. Do Not Insert Foreign Objects In Between Rotating Fan Blades.
• To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To Outlet Box Marked Acceptable For
Fan Support And Use Mounting Screws Provided With The Outlet Box.
• To Reduce The Risk Of Electric Shock, Disconnect The Electrical Supply Circuit To The Fan Before Installing
Light Kit.
•
CAUTION
To reduce the risk of injury to people, the fan must be mounted at least 7 ft. (2.1 m) clear distance
from the blades to the floor and 30” (0.76 m) clear from any wall or object.
•
CAUTION
When mounted directly to the building structure, appliance installation shall not expose
combustible material and do not install the appliance to a ceiling with combustible finish. The installation of
the appliance cannot leave the wood of the rafters or any thermal insulation exposed to the interior of the
room.
•
CAUTION
All set screws must be checked, and retightened where necessary, before installation.
• All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical
installation should be performed or approved by a qualified licensed electrician.
• Switches must be UL/CSA General Use Switches. No dimmers, electronic switches or rheostats should be
used with this fan.
• After making electrical connections, spliced conductors should be turned upward and pushed carefully up
into outlet box. The wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box.
• Electrical diagrams are for reference only. On installation, comply with all your local electrical codes.
• Do not operate the Eco Mode while the fan blades are still in regular motion. You must turn the fan off and
wait for the blades to stop before you engage Eco mode as this will reverse the movement of the blades.
• To avoid personal injury or damage to the fan and other items, use caution when working around or
cleaning the fan. Do not place any object in the path of the blades.
This fan may be installed with a Down Rod or Flush Mount
