2/6
User manual built-in burners
Content
1. Important safety instructions regarding FORNO
®
built-in burners
Important
1.
Important safety instructions
2.
Installation instructions
3.
User manual
4.
Technical specifications
In case of use of the FORNO
®
built-in burner these safety instructions should always be followed to reduce the risk of fire and other damages to
people and property.
Read these safety instructions carefully before the built-in burner is put into operation.
1.
The FORNO
®
built-in burner must always be fitted according to the installation instructions. The FORNO
®
built-in burner should be placed
directly on a solid, stable surface.
2.
The device must be placed away from flammable materials (min. 2 meters) and the area around the appliance must be clear of combustible
materials and/or liquids.
3.
Before use, check if all connections to the cylinder are properly and tightly fitted. If the connections are loose, make sure everything is tight
-
ened before use. Make sure the gas is turned off while working on the device.
4.
Every time the gas connection is re-connected, the gas connection and hose must be checked for leaks. See chapter 2.4.
5.
The hose must never come into contact with hot surfaces of the burner.
6.
The hose must comply with all national laws and regulations. The hose is connected to the supplied gas pressure regulator.
7.
Never change the air valve settings of the burner. If the air vents of the fire rings are blocked, the device is no longer safe for use and a gas
specialist should be contacted.
8.
Never obstruct the free flow of air and oxygen to the device. Never change anything to the gas-technical system of this unit. Any changes to
the system can be dangerous and will void any warranty on the device.
9.
Keep children and pets away from the unit. The FORNO
®
built-in burner has components which become very hot when in use. After use wait
until the appliance has fully cooled down before children and pets come into contact with the device. We recommend a cool down period of
at least 1.5 hours.
10. Never move the FORNO
®
built-in burner if the device is in use. Wait at least 1.5 hours after use before moving it.
11. Never leave the FORNO
®
built-in burner without supervision during use.
12. The device has an open fire, make sure that during use of the FORNO
®
built-in burner there will always be supervision on children and pets by
a mature and responsible person.
13. Do not touch the lava rocks and ceramic logs until they are completely cooled down.
14. Turn off the gas supply after use.
15. Wait at least 1 hour after use before placing the stainless steel cover on the unit. If the cover plate is placed earlier, the burner will be damaged
and a fire may occur.
16. The FORNO
®
built-in burner is designed to emit warmth and should only be used outside.
17. Always use the prescribed gas cylinders as described in this manual.
18. The FORNO
®
built-in burner should always be used outdoors or in well-ventilated areas. A well-ventilated room is for at least 25% open.
19. Be careful, accessible parts may be very hot. Always store this user and installation manual with the device.
20. Make sure the hose is always bent straight down towards the cylinder and never pressed against hot surfaces.
•
Read these installation and operating instructions carefully before installing and using the appliance.
•
The operating and installation instructions must be available at all times at the appliance. In case of sale to third parties, these documents
must be supplied.
•
In case of improper use or failure to follow the safety instructions, all liability will be rejected and the warranty does not apply.
•
For assistance or additional information consult a qualified technician, FORNO
®
help desk or your sales address.
•
Warning: Keep young children at a safe distance. Accessible parts may be very hot!
•
The FORNO
®
fires may only be used outdoors.
•
This appliance must be installed with the current regulations in accordance.
