background image

www.quadrafire.com

7014-139F

June 27, 2008

MT VERNON STOVE AE & MT VERNON INSERT AE

Heat Exchanger & Exhaust Cleaning Instructions

Refer to your Owner’s Manual for complete cleaning 

instructions for all components.

For trouble free use of your pellet appliance you must perform cleaning 

as called for in these instructions.  Not doing so will result in:
 

•  Poor operating performance

 

•  Smoke spillage into the home

 

•  Overheating of components

Not properly cleaning your appliance on a regular basis will void your 

warranty.

WARNING

Fire Risk

Summary of Contents for MT VERNON STOVE AE

Page 1: ...omplete cleaning instructions for all components For trouble free use of your pellet appliance you must perform cleaning as called for in these instructions Not doing so will result in Poor operating performance Smoke spillage into the home Overheating of components Not properly cleaning your appliance on a regular basis will void your warranty WARNING Fire Risk ...

Page 2: ...e off before you can unplug the appliance before servicing 2 Smoke spillage into the room can occur if the appliance is not cool before unplugging The appliance must be in complete shutdown completely cool and the exhaust blower off before performing any cleaning or maintenance There is a risk of shock if the appliance is not unplugged before servicing the appliance PROPER SHUTDOWN PROCEDURE NOTE ...

Page 3: ...e Figure 2 4 Use the crevice tool to finish cleaning the heat exchanger fins It is critical that the 2 exhaust exits at the back of the firebox floor left and right be thoroughly cleaned Figure 4 There are several ways this can done a Use the crevice tool b Attach a hose 1 2 inch 12 7mm in diameter and approximately 2 feet 607mm in length to your vacuum hose c Use a bottle brush and push the ash d...

Page 4: ...b Use an 11 32 nut driver to loosen all 6 nuts but do not remove Rotate the blower and remove from the housing Figure 6 c Set the blower on the top of the housing for the stove and place on the firebox floor for the insert You do not need to disconnect the wires Figure 7 d Vacuum out the exhaust area Figure 8 You may need to replace the gasket at this time also Order part SRV7000 423 e A view of t...

Reviews: