Forney 95FI, Operating Manual

Page: 13 / 32

WARNING
ARC RAYS CAN
INJURE
EYESI
To reduce the risk
of
arc flash, make certain
that the welding wire, when it finally comes
out of the end of the gun, does not touch the
ground clamp or any grounded piece of
metal. IMPORTANT! The welding wire is car­
rying welding current whenever the welder is
turned on.
11. Pull
the trigger on the welding gun to feed
the wire through the gun assembly.
12. When
at
least an inch of wire sticks out
past the end of the gun, release the trigger.
13. Install the supplied 0.040 inch (1.0mm)
size contact tip.
Note: Due to inherent variances in flux­
cored welding wire, it may be necessary
to use a welding tip one size larger than
your flux-core wire if jams occur.
14.
Slide the contact tip over the wire (pro­
truding from the end of the gun). Screw
a
u
W
s
th
a
th