Forney 95FI, Operating Manual

Page: 10 / 32

the speed at which the welder feeds wire to
the
gun. 1
is the slowest wire feed speed, 10
is
the highest. You will need
to
adjust
or
·"tune-in" your wire speed for different welding
conditions (thickness of metals, metal type,
wire size, etc.). When the wire speed is prop
erly "tuned-in" the welding wire will melt into
the
material you
rewelding
as
quickly
as i t is
fed through the welding gun.
Voltage Selector - This two position switch
adjusts the voltage or "heat" of your welder.
Select
MIN
setting for lower voltage and
MAX setting for higher voltage. Different
materials and material thickness will require
different voltage settings. You will need to
adjust your voltage accordingly for different
welding conditions.
By
properly adjusting
your voltage settings and wire feed speed,
you
will enable clean, precision welds. (Refer
to the Suggested Settings Chart on p.29 of
this manual.)
i
g
Y
w
a
w
W
w
o
u
w
o
s
w
a
t
s
t
a
t
w
w
p