Adjust wire-feed
speed ( ) and
voltage ( )
Flux-
Cored
* Face the appropriate groove
towards the inside of machine
Set drive roll
Solid
wire
Connect to input power
With contact tip
3/8” from metal,
depress trigger
completely to
initiate arc
Install wire spool
0.023” (0.6mm) - 0.035” (0.9mm) diameter
Feed wire and set pressure
Knob set ~2-3
marks
Remove
consumables
and depress
trigger until
wire comes out.
Replace
consumables
See chart on welder for settings.
Note: Spool gun WFS
adjustment must be made on
the machine.
FIND MORE INFORMATION AT FORNEYIND.COM
4.
5.
6.
7.
9.
10.
11.
8.
Connect MIG gun and
ground clamp
QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected]
forneyind.com
MIG QUICK START GUIDE
190 MP WELDER
ITEM# 323
Set polarity for MIG (solid wire)
or Flux-Cored
Solid wire
Flux-cored
Read user manual
2.
3.
1.
Select Manual MIG
process
Pressure knob
NOTE: If using gas:
2. Attach hose to
regulator and
regulator to
gas bottle
1. Attach gas hose
to machine
MIG Gun
Ground
Clamp
• Generator OK with continuous output >
4,000 W (120V) or 10,500 W (240V)
• Extension cord: #12 AWG or larger. 25’
(8m) or shorter extension cords
recommended
For flux-cored welding,
keep contact tip closer
(ideally under 1/4").
Manual MIG
MIG QUICK START GUIDE
190 MP WELDER
ITEM# 323
8” (200mm)
wire spool
4” (100mm)
wire spool
