Installation and Operating Manual
Installation and Operating Manual
HOBS
17
What?
How?
Warning!
Usual contamination
glass (fingerprints,
traces of food, non-
sugar stains on the
glass)
1.
Switch off power supply of the hob.
2.
Apply a hob cleaner while the
glass is still warm (but not hot!).
3.
Rinse the surface with water and
wipe dry with a clean cloth or
paper towel.
4.
Switch on power supply of the hob
again.
– When the hob power supply is off,
the residual heat indicator will not
lit, but the induction burner still
may be hot! Be careful.
– Metal, certain nylon and sponges
and abrasive cleaners may
scratch the glass. Always read the
sponge’s instruction to under-
stand, whether it is suitable clean-
ing the hob, or not.
– Never leave residuals of a cleaner
on the hob surface, since this may
cause formation of stains on the
glass.
Stains left by boiled
out liquids, melted
foods and hot spots
left by burnt sugar
Immediately remove these types of
contamination with a kitchen scraper
or cooking blade suitable for glass-
ceramic induction hobs, in so doing
be careful of hot burners:
1.
Turn off power supply of the hob
using mains breaker.
2.
While holding the scraper or cook-
ing blade at the angle of 30°, clean
away the dirt from the non-heated
part of the hob.
3.
Remove the contamination with a
cloth or paper towel.
4.
Follow the steps 2-4 from the rec-
ommendations on removing usual
contaminants in the table above.
-
Remove stains left by melted and
sugar-containing foods, as well as
the stains left by boiled away liquid
as soon as possible. If you leave
these stains on the glass until com-
pletely cooled, they will be extremely
difficult to remove, and in some
cases they will permanently damage
the surface of the glass.
-
Danger of injury: the blade of the
scraper, which is under the protective
cap, is sharp as a razor. Be extremely
careful while using it and always
store it in a safe place, inaccessible
for children.
MAINTENANCE AND CLEANING
Summary of Contents for PIA 60 MERIDIANA
Page 31: ......
Page 32: ...www fornelli tech com...