background image

Installation and operation instructions 

Installation and operation instructions 

HOBS

3

to the appliance, make sure that power cab-

les of electrical appliances being used do not 

touch those areas on the hob that may beco-

me heated and are laid far enough from hot 

surfaces of the appliance. The power cables 

shall be attached to the kitchen table and not 

touch hot parts of the hob. 

At regular intervals (but twice a year at least) 

check the technical condition of the power 

supply cable and flexible gas supply hose (if 

this hose is used for gas supplies). Should 

you happen to find any defects (cracks, mel-

ting or hardening of materials), contact your 

service center immediately. To avoid hazards 

of any kind, let your service provider replace 

the cable, or a professional of similar quali-

fication.  

This gas hob is only designed for food prepa-

ration. It shall never be used for heating pre-

mises or drying laundry above it. 

When overheated, fats and sunflower oil 

become inflammable. Preparing your food 

with use of fats or sunflower oil (for instance, 

frying potatoes in frying oil), do not leave the 

appliance unattended.

KEEP IN MIND! 

Never use water to extinguish inflamed 

fats or sunflower oil! Tightly cap the dis-

hware with inflamed oil or fat, or cover 

it with a material which would prevent 

access of oxygen to flames.

Keep the appliance clean. Food residues may 

cause fire.

Upon each use make sure that the position 

of any switch on the control console of hob 

(and, as may be required, on that of the gas 

supply) is OFF or CLOSED. 

In the event of breakdown disconnect the 

hob from the mains and gas supply system. 

Do not operate the faulty appliance for it 

may be dangerous. Do not try to repair the 

equipment yourself. Repairs performed by 

non-qualified persons may result in damage 

to the appliance and injuries. The first thing 

to do is to refer to the user’s manual. 

Should you fail to have found information 

required, feel free to contact the nearest 

service center. The appliance may only be 

repaired by experts of an authorized service 

center. 

Demand the use of branded spare parts only! 

When connecting the hob to a liquefied gas 

supply system, arrange and operate gas bot-

tles in line with the Fire Safety Regulations 

(in Russia they are named “PPB 01-03 P.111”).

ATTENTION!

IT IS EXPRESSLY PROHIBITED TO CAR-

RY OUT A LEAKAGE TEST USING MA-

TCHES OR OPEN FLAMES! 

ATTENTION!

Upon occurrence of gas odor, turn off the 

gas delivery cock (shut off the gas bottle 

valve). Upon that, turn off any cock at the 

hob. Open the windows, do not take any 

action which may result in occurrence of 

sparks or fire before gas escape is comp-

letely eliminated: do not strike matches, 

do not smoke, do not switch on / off the 

lighting and electrical appliances. 

If you are unable to detect and elimina-

te gas escape, immediately call the gas 

emergency service.  

Summary of Contents for PGA 45 FIERO BL

























Reviews: