10
3. Transporting and handling the equipment
3.1
Transporting and handling the equipment
G
The weight of the equipment is designed so that two persons may install the equipment
and perform any necessary manipulation. Two expanding sticks (A) are used to lift the
machine. After the machine is installed in place, it is necessary to install the arms holding the
foil, the perforation wheel, and the knife.
Figure 2
3.2 Storage of the equipment
The equipment must be placed on a solid and even surface
(Recommended accessories – the FOLIANT table with appropriate width)
Temperature for storing -10°C to 60 °C (-10°F to 140°F)
Relative humidity: 20 to 80%, non-condensing relative humidity
3.3 Location of the equipment
The equipment must be situated on a solid and flat surface (working plate) dimensioned for
the weight of the equipment and must not be placed in the vicinity of other heat sources,
including direct sunlight. All control elements must be freely accessible. The equipment must
have free handling space around it [at least 1 meter]. The main switch (Figure 1 to 10),
serving also as the emergency switch for emergency situations, must also be freely accessible.
Figure 3
A
A
Summary of Contents for Foliant 370T
Page 2: ...2...
