Manual - Formech Compac Mini
25
Service / Repair
Electrical troubleshooting (continuation)
Check that the connectors on the back of the IEC socket are properly
fixed. See wiring diagram if any have fallen out.
If the fault still cannot be found, then check the front of the machine:
Remove the 4 self-tapping screws retaining the
front panel.
Remove the 2 self-tapping screws on each side of
the machine.
Before any maintenance work is carried out, electrical supply must be locked in the OFF position
or the mains lead removed.
Only a qualified electrical technician may work on any parts carrying mains voltage and should be
responsible for ensuring that the machine is in a safe condition before allowing services to be res-
tored.
