Formax Square IT 2, Operator'S Manual

Page: 40 / 42

40
6
Limitations
• The Square IT 2 is suited for customers whose booklet making needs will not
exceed a yearly average of 15,000 booklets per month;
• If booklets entering the Square IT 2 are not uniform or if they are skewed, the
booklet quality will vary accordingly;
• The maximum recommended number of sheets that can be bypassed without stapling is
6 sheets of 80 gsm. If there is very low friction between the sheets, running non-stapled
sets may be difficult;
• Non-stapled books should not be trimmed or square folded;
• If booklets are made of paper lighter than 80GSM, the cover paper should be 80GSM or
more to get an acceptable output results when square folding;
• Covers may show marking along the spine of the booklet from the clamps. The more
pages in the booklet, the more evident the marking;
• Small booklets A5/ 5,5 x 8,5” or smaller may stack poorly on the conveyor;
• Booklets will not be stacked on top of each other, therefore it is recommended that the
operator places a box underneath the stacker to collect the finished booklets;
• Exiting booklets might be a bit skewed;
• The booklet spine can, depending on paper quality and thickness, have different sizes of
tassel / turf at its top and at its bottom;
• If corners/edges of sheets by any reason are folded before trimming,
result may look as illustrated when corners/edges are unfolded.