Formax Square IT 2, Operator'S Manual

Page: 22 / 42

22
2
Booklet Production
Booklet Production
Once all the settings have been ad-
justed, press on the play button to
start Booklet Production.
Refer to “ Feeding Booklets ” to under-
stand how to correctly feed a booklet
in the machine.
When the Booklet Production is start-
ed, this screen is shown.
The operator can adjust some set-
tings while the booklets are being pro-
duced by pressing [Adjust Settings].
This will bring the user back to the
Manual Feed Menu.
The user can then modify the finish -
ing settings as described earlier in
this section.
NOTE:
Squar ing can be changed without any limitation when running the machine, while
Trimming can be adjusted only in the range of ±3 mm / ±0.12”.
If trimming needs to be adjusted further, operations first need to be stopped: this is done by
pressing the red stop button.