Formax Square IT 2, Operator'S Manual

Page: 21 / 42

21
2
To adjust the amount of side trim, press
[+] or [-] or enter the desired length of
the booklet using the numeric keypad.
NOTE:
The maximum amount of trimming on
each side is 24 mm / 0.94”.
Push the green check mark to confirm
the changes or the red cross to discard
them and to go back to the main menu.
Pushing the blue play button will bring
the user to the next setting: “Square
Fold”.
Square Fold
Square Fold
The operator has the option of
sharpening or softening the square
edges of the finished booklet spine
based on application or preference.
The Auto mode is on by default but, if
the square fold is not satisfactory, the
user can adjust it manually by tapping
on the green switch, which will turn off
the Auto mode.
To adjust the amount of Square fold
pressure, press [+] for sharper edges
and [-] for softer edges.
Push the green check mark to confirm
the changes or the red cross to discard
them and to go back to the main menu.
NOTE:
If the Square Folder does not give
satisfactory results, it might need to be
Fine Adjusted. To do so, see “Square
Folder Fine Adjustment” under section
3 of this manual.
Side Trim (continued)