![background image](http://html1.mh-extra.com/html/formax/fd-430/fd-430_operator-maintenance-and-parts-manual_2320039018.webp)
18
16.
Aff
ix the front panel to the left and right with M6x16 screws.
17. On the dividing panel (left)
af
fix with M5x20 screws and M5 discs.
Make sure that the front wall is in line with the main body and the
side cover is level with the front!
18. Assemble belt, separating rubbers and spring pressure plate on the panel,
tighten with a knurled nut M5 and
af
fix firmly with disc M5.
19. Replace the basin in the stand, tighten star grip M10 (fully).
20. Slide
infeed tray
into place on the left and secure with M5x18 screw.
21. Replace
outfeed
tray with one body disc M6, a M6 spring disc and knurled nut
M6 on the back.
5.3 Replacing the conveyor roller rubber rings
Depending on the degree of wear, these rubber rings of the conveyor rollers should be
replaced regularly.
Always replace all 5 rubber rings at the same time.
These rubber rings can be easily removed by hand by raising the conveyor rollers.
5.4 Replacing the separating rubber
Depending on the degree of wear, the separating rubber should be changed regularly.
Always replace together with the transparent slide plastic sheet.
The separating rubber is removed by unscrewing the knurled nut on the side panel.
When inserting, make sure that the transparent plastic belt is put in
first.
5.5 Replacing the moistening rubber
Depending on the degree of wear, moistening rubber should be replaced. This should
always be completed by replacing the axis and square top.
When inserting, make sure that the square top touches the inner
square of the axis so that the axis can not rotate!