![background image](http://html1.mh-extra.com/html/dexbaby/wipe-warmer-ulta/wipe-warmer-ulta_manual_2490081001.webp)
DANGER:
To reduce the risk of burns, electrical shock, fire and accident, use wipe warmer only in accordance with the following instructions.
SAFETY INSTRUCTIONS
• Please read ALL instructions carefully before using wipe warmer.
• This product is designed to warm baby wipes only. Do not use it to warm anything else.
• Do not use in an oxygen - enriched environment or near equipment that stores or emits oxygen.
• For household use only.
• Keep out of reach of children.
• Arrange power cord to minimize the possibility of accidents such as tripping.
• Do not cover with blanket or any type of insulating material.
OPERATING INSTRUCTIONS
1. Place wipe warmer on a flat, stable surface.
2. Remove wipes from their original container.
3. Open the main lid and insert a stack of either “pop-up” style or standard folded wipes.
a. For pop-up style wipes, simply open the dispenser lid recessed in the main lid, take the top wipe, and gently push it up through the opening in the main lid. Close
both lids (locking the main lid) and you’re ready to go. Just open the dispenser lid to access a fresh pop-up wipe.
b. For standard folded wipes, simply open the main lid for access.
4. Plug transformer into a standard household 110-120V AC outlet. Do not plug into a 220V AC outlet.
5. INITIALLY WIPE WARMER WILL TAKE A NUMBER OF HOURS TO HEAT THE WIPES. Wipes will be only slightly warm to the touch because a wipe warmer is designed
simply to take the chill out of room temperature wipes. Please do not expect "hot" wipes.
6. To turn on the changing light, push the button on the top. To turn off the changing light, push the button a second time, or simply let it turn off automatically after 10 minutes.
7. Carefully follow all instructions provided with the baby wipes you plan to use.
8.
Unplug unit when it is not in constant operation.
CLEANING INSTRUCTIONS
1. Unplug and allow to cool completely.
2. Remove wipes and clean all surfaces with a damp cloth.
CARE INSTRUCTIONS
• Do not use the power cord as a handle. Never pull on the power cord.
• Each time you add wipes to the wipe warmer, add up to ½ cup of water, pouring it evenly over the top portion of the wipes.
• If the baby wipes dry out or appear to need additional moisture, add up to ½ cup of water, pouring it evenly over the top portion of the wipes, and your wipes should return to
normal. If you notice discoloration, don’t be alarmed. While this is quite rare, some wipes turn brown from prolonged heat exposure.
• Do not use the wipe warmer if any signs of deterioration appear on the unit or on the power cord.
• Do not tamper with the wipe warmer in any way.
• Do not place unit on wood or painted surfaces.
• If wipes are dispensed daily, you will never notice drying out or browning of wipes. However, if you leave the wipe warmer plugged in for a prolonged period without dispensing
wipes, they will brown as a result of prolonged heat exposure. Nothing is wrong or dangerous, just unsightly. So please make sure you unplug your wipe warmer if you do not
use it for a prolonged period of time.
WARNING:
Changes or modifications of this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
dexbaby
WWCL-01
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
DEX Products, Inc.
|
www.dexbaby.com
|
800.546.1996
|
2019 E. Monte Vista Ave. Suite 500, Vacaville, CA 95688
ultra wipe warmer