![background image](http://html1.mh-extra.com/html/formax/fd-430/fd-430_operator-maintenance-and-parts-manual_2320039010.webp)
10
10. The rest of the water in the moistening tank can be sucked out via the suction
rubber pear through the ring-shaped hole and the moisture basin water level will
slowly go down.
In this way the water compartment is shut off and the
machine parts connected to electric power cannot come into
contact.
11.
Guide the infeed tray support pins into the receptacles and tighten both
thumbscrews.
3.3 Power supply
The operating voltage required is as specified below:
100-120VAC/60Hz or 200-240VAC/50Hz
The power supply has been pre-selected by the factory!
Always take notice of the type plate on the left side of the
Envelope Sealing Machine!
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920