Formax FD 386, Operator'S Manual

Page: 7 / 29

Upper Fold Table Receptacle Location
Lower Fold Table Receptacle Location
Plug in Receptacle
Plug in Receptacle
Fig. 3b
Fig. 3a
4. Plug the fold table cables into the receptacles on the side
frame (Fig. 3a & 3b).
5. Insert the telescoping extension tray into the end of the
outfeed conveyor (Fig. 4).
6. Insert the Multi-Sheet Feeder into the four slots located
on the top cover (Fig 5). This is standard on the
FD 38Xi, optional for the FD 386.
7. Make sure the power switch is in the “OFF” position.
Plug the power cord into the power inlet and the wall
outlet.
Fig. 4
Fig. 5
4 Slots
3
Telescoping extension tray