OPTIONAL CONVEYOR INSTALLATION
To install the 18” conveyor, follow these steps:
1. Unplug the pressure sealer from the wall outlet.
2. Remove the catch tray from machine.
3. Remove the upper fold table.
4. Plug the power cord into the underside of the conveyor.
5. Install the conveyor mounting bolts. (Fig. 19)
6. Attach the conveyor to the pressure sealer.
7. Install the stacker wheel assembly into the holes indicated below. (Fig. 20)
8. Adjust the stacker wheels to conveyor decal.
9. Plug the conveyor power cord into the power outlet on the pressure sealer.
10. Reinsert the upper fold table.
11. Plug the pressure sealer into the wall outlet.
Holes For Stacker Wheel
Assembly
Stacker Wheels
Mounting Bolts
Fig. 19
Fig. 20
Summary of Contents for FD 2052IL AutoSeal System
Page 1: ...FD 2052IL AutoSeal System OPERATOR MANUAL FIRST EDITION 12 2007...
Page 2: ......
Page 4: ......
